BMW
R1100S / R1150R & RS / K1200RS & GT
passenger peg kit
Back to BMW
Parts Page
R1100S pictured
Pegs move down and forward 1.8" Note return spring.
Peg stays down all the time.
For solo riding the new adapter and peg assembly can be removed in less than 3
minutes.
Just remove the C-clip, pull the pivot pin and set the pegs aside. Re-install
just as quickly.
Distance from passenger peg to driver peg is reduced from
9.5" to 8.0"
Note: On this bike the driver peg kit is install.
Passenger peg position is out to the side more, allowing overlap of feet.
Parts no longer used.
During installation be careful the detent ball does not fly across the room.
|
P1-R1100S/R1150R /K1200RS & GT Passenger Footpeg Kit - $139.95 |
 |
