Go to AR-15 Clamp-On MaxRail page

 Go to home page

                     MaxRail patent pending                                         
                                            Mount multiple sighting devices on an AR-15.                                                        
Available in either bolt on or clamp on versions, see below.

Weight, 6 oz / foot.   Includes Allen wrench and ten 6-23x1/2" flathead screws.
 

Made in Willoughby, Ohio U.S.A. , from 6061-T6 aluminum custom extrusion.
Standard finish is hardcoat anodize black - Lengths 13 , 14, 16 and 18 inches.

 

The MaxRail is designed for use on AR-15's with full length upper Picatinny rails.
When installed, the rail creates a rigid structure of receiver and handguard allowing multiple
 precision optics to be mounted anywhere along the top surface of the gun.

Installation drill and tap guide block.
 

MaxRail Clamp-On
Below, in raw aluminum, are pictures of the MaxRail clamp-on version.
No modifications to the AR15 are required.
A recoil lug (key) holds the rail longitudinally.
Clamping bars hold the rail tight to the gun.
Easy to install.
Naturally, in black on production parts.

Recoil lug locks MaxRail to receiver.

Go to home page

 Go to AR-15 Clamp-On MaxRail page