Telelever front suspension allows the fork sliders to be raised up through the upper triple clamp without affecting the bike's geometry.

The handgrips move up 2.25" and back 1.0"

None of the original wiring, hoses or cables needs to be changed, except -

On non ABS models a longer brake hose is required.
For Brembo calipers (99 thru Jan 2001) use BMW part # 34-32-2-331-915

For BMW EVO calipers (Feb 2001 thru today) use BMW part # 34-32-7-651-553

Left hand grip wiring runs outside of the left fork tube. Wiring tie wraps at the front of the gas tank are cut away to provide more slack in the wiring harness.

Please note: 
The handlebar kit only works on bikes that come from the factory with the clip-on handlebars mounted underneath the triple clamp. 
If your R1100S has its bars mounted above the triple clamp, our kit will not help.